Advertisement
5
ASSEMBLE BENCH TOP—continued
17. Continue to install Tek screws and washers
along the side rail at each support tube.
19. With assistance, carefully lift the assembled
bench top and set it in place on the support
frame. Frame is heavy!
16
16
Assembly Instructions
NOTE: Install screws in a position that best
secures both the expanded metal top and the
support tube to the side rails.
20. Center bench top on support tubes with
each bench top side equal distance from the
support tube.
102921B
FA4482B
Neo-Bonded
Tek Screw
Washer
Photo shows a Tek screw and washer installed
through the side rail and into the support tube.
18. Move bench top and frame to the place where
final assembly can occur.
21. Install 112815 poly corners using 108553
screws. Predrill holes through poly corners and
metal for best results using a 1/16" drill bit.
Revision date: 08.26.15
Advertisement
