Step 10: Access Stratagy Ivp8; Remote Access - Toshiba Stratagy IVP8 Installation Manual

Installation

Step 10: Access Stratagy IVP8

Step 10: Access Stratagy IVP8
Prior to accessing Stratagy IVP8, verify that Stratagy IVP8 is operational by making a test call into
the system.
Note Menu screens detailed in this section are available only in Stratagy Admin version VSA.2G
or later.
1. From the DOS prompt ( C:\ADMIN3 ), type: admin and press Enter . The Stratagy Admin
screen displays.
Important!
2. Press Enter .The Stratagy Admin software prompts for the Stratagy IVP8's system password.
3. Type the password (the default is Stratagy ) and press Enter .
If a modem is not detected, Stratagy Admin establishes a direct connection (local access) and a
version of the standard Main Menu displays
"Configure Stratagy IVP8"
If a modem is detected,
Stratagy IVP8 displays the
screen shown at right:
Proceed to
on page 20
on accessing the
Stratagy IVP8 remotely.

Remote Access

Stratagy Admin software version VSA.3x has two modes of accessing the Stratagy IVP8 remotely:
•
Direct Dialing Mode — the Stratagy IVP8 modem has a dedicated telephone line, enabling you
to dial into the number directly.
•
Manual Dialing Mode — the Stratagy IVP8 modem does not have a dedicated telephone line
and an operator must transfer the call to the modem number.
Note Manual dialing requires a standard telephone be connected to the Stratagy Admin PC
modem.
Earlier versions of the Stratagy Admin software permit only the direct dialing mode.
Direct Dialing Mode
➤
Type the telephone number (50 digits maximum). Do not use dashes (e.g., 9,7678989). Press
Enter .
Once the connection is made to the Stratagy IVP8 modem, a carrier tone is heard. The Stratagy
Admin synchs up to the modem. A message reading Connection established appears
briefly on the screen and the Main Menu displays. Proceed to
Stratagy
20
The Stratagy Admin PC must be configured for the correct serial port in Stratagy
Admin prior to performing
on page
"Remote Access"
for instructions
IVP8".
Substep 2.
("Main Menu" on
21.
Stratagy IVP8 Installation Guide
page 4). Proceed to Step 11:
Step 11 "Configure
01/02