Restore Utility - Toshiba Stratagy IVP8 Installation Manual

6. If your Stratagy Admin PC's
hard drive has enough
available disk space, press Y
to backup the files
...or if not, press N to cancel
the backup procedure.
7. Press Y to continue.
CAUTION! If Stratagy IVP8 is not rebooted, all ports remain in an off-hook condition.
8. When the backup is complete, press Y to reboot Stratagy IVP8. The Stratagy Admin PC returns
to the C:\ADMIN3 DOS prompt.
You cannot reconnect to Stratagy IVP8 using Stratagy Admin until the Stratagy IVP8 status
Note
light is green. Any attempt prior to that time fails.

Restore Utility

Because of possible errors that can be induced through the telephone network,
CAUTION!
Toshiba advises that you perform the Restore Utility on site.
The Stratagy IVP8 Restore Utility is used to restore previously backed up names, greetings and/or
database from the Stratagy Admin PC to the Stratagy IVP8.
Restore the Database(s)/Names/Greetings
Stratagy IVP8 Voice Processing is suspended during the restore procedure. Any
CAUTION!
existing connection is broken. For additional information on the Restore
procedure, see the Caution on
1. From the Tools menu, press
2 .
2. From the Restore screen
(shown at right), enter the
selection number. A second
screen displays requesting
the source directory.
3. The directory defaults to C:\ADMIN3\BACKUP on the Stratagy Admin PC. If you have the
file(s) backed up to a different directory, type over the default. Press Enter .
Notes
•
Restoring files from the Stratagy Admin PC's floppy disk drive is not supported.
•
Be sure to enter the complete path, including the drive letter.
4. (Optional) If you entered selection 2 "Restore Names & Greetings" in
enter a beginning and ending mailbox number. Press Enter after each entry
Leaving both fields blank defines all mailboxes.
Note
...or if you entered selection 3 "Restore Database, Names & Greetings" in
in the mailbox number fields to leave them blank.
Stratagy IVP8 Installation Guide
page
01/02
33.
Step
Maintenance
Tools
3236
3240
2, you are asked to
Step 2, press Enter
35