Toshiba Stratagy IVP8 Installation Manual page 50

Maintenance
Tools
Trace Filter Setup Screen
Figure 5 Trace Filter Setup Screen with System Defaults
The following fields appear on the screen:
Categories
Detail
Normal
Call Activity
Traffic
System
Error
Threads
Main
Interface
Event
Rover
Watch
SMDI
Parameters
Time From
38
Categories/classes of the traced records. Use the spacebar to toggle between Yes
for inclusion of data or No for exclusion.
Detail system information.
Note
Since this information is very detailed and complex, it is only useful for
advanced technical personnel trying to debug the system.
General system activities including digits dialed and boxes executed.
Log ins, log outs, messages received, and messages retrieved.
Information concerning system load and possible problems caused by the load.
Control flow between functions.
Abnormal conditions, faults, exceptions, etc.
Program processes. Use the spacebar to toggle between Yes for inclusion of data
or No for exclusion.
System messages and trace events relating to the overall system.
Communication protocol between the Stratagy IVP8 and Stratagy Admin.
Anything that happens to the Stratagy IVP8 from outside the system (e.g., detects
voice, dial tones, ringing, etc.).
Actions that the Stratagy IVP8 takes (e.g., notifications and internal scheduling).
Timers, system self-monitoring.
SMDI information.
Limiting factors (date/time range, channel information, mailbox information)
Starting date and time for trace data. Enter in dd/mm/yy hh:mm:ss format.
3248
Stratagy IVP8 Installation Guide 01/02