10.6 STORING PRINT JOBS
To store a file as a real-time print job, attach a file to be stored as a print job to e-mail, input the
subject including "PRTDATA:", then send e-mail to the printer. When receiving e-mail, the printer
stores the attached file as a real-time print job.
To store a file as a spooled print job, attach a file to be stored as a print job to e-mail, input the
subject including "PRTPOOL:", then send e-mail to the printer. When receiving e-mail, the printer
stores the attached file as a spooled print job.
For the spooler function, see section 7.4.7.
NOTES:
1. If any subject other than "PRTDATA:" and "PRTPOOL:" is described, the printer prints
2. If the same print job name (file name) as the existing file is used, the new data will
3. When "PRTDATA:" or "PRTPOOL:" is included in a subject, be sure to place
an attached file immediately when receiving e-mail. The file is not stored in the ATA
card as a print job. For more details on the spooler function, refer to section 7.4.7.
overwrite.
"PRTDATA:" or "PRTPOOL:" at the beginning of the subject.
- 44 -