Downloading Firmware Files - Toshiba TEC B-SX4T Network Specification

7.4.5

Downloading Firmware Files

(1) Select "PROGRAM DOWNLOAD" from the menu at the left of the window.
Select the firmware file to be downloaded, then click on the [Transmit] button.
There is a difference between the firmware file format that is transmitted here and that which
is transmitted by the program downloader (for a Centronics/RS-232C).
The firmware used by the program downloader is a binary file of the program file itself.
However, for the file to be used here, the Loading Prepare Command and the Program Data
Command should be attached before the firmware file for the program downloader.
(Example)
When the size of the firmware file for the program downloader is 1280 Kbytes, the
following command should be attached before it.
[ESC]LD;0x00 0x0A 0x00 0x00,0x05 0x00[LF][NUL][ESC]LP;
If the proper Loading Prepare Command and the Program Data Command are not
attached, the message "LOADING ERROR" is displayed on the LCD. The firmware file is
not downloaded.
NOTE: The ATA card must have free space greater than the size of the file to be
transmitted to the ATA card, since temporary files are created in the ATA card.
Indicates the firmware size (KB) in hex.
1280 (KB) = 0x0500
Indicates the address where the firmware files are
downloaded.
Address: 0x000A0000
- 17 -