Mail Transmission Specifications; Setup - Toshiba TEC B-SX4T Network Specification

10.4 MAIL TRANSMISSION SPECIFICATIONS

10.4.1 Setup

(1) Register the printer account in the mail server.
(2) Describe the required information for mail transmission in the setup file.
The setup file should be saved as "smtp.ini" in the "mail" folder in the ATA card.
How to describe the setup file is as follows:
• IP address setting of the mail server
Format
Set the IP address of the mail server.
• Mail address of the printer
Format
Set the mail address of the printer. Max. 256 characters are available.
• Port for SMTP
Format
Set the port to be used for SMTP. Normally, "25" should be set.
• Status transmission setting
Format
If this parameter is set to "1" and a print request is sent to the printer by e-mail, the
printer automatically returns a status report to the sender when printing is completed
normally.
• Address setting for sending e-mail according to the status type
Mail transmission, the address where mail is to be sent, and the message text can be
set for each status type.
Format
When this parameter is set to "1", mail transmission is enabled. When this parameter is
set to "0", mail transmission is disabled.
Format
Set the address where mail is to be sent.
delimiting each address with a comma. Up to 20 addresses can be set within 1000
characters.
HOST_IP=123.456.789.012
FROM_USR=bsx@foo.toshibatec.co.jp
PORT=25
RESMAIL=1
ENABLEaa=1
TO_USERaa=foo@foo.toshibatec.co.jp
- 38 -
Multiple users' addresses can be set,