Toshiba TEC B-SX4T Network Specification page 13

MAINTENANCE COUNTER: Indicates the values for various counters such as the label
distance covered. (The display is updated every 3 seconds.)
• TOTAL FEED: ∗.∗ km
∗.∗ km
• FEED:
∗.∗ km
• PRINT:
• CUT COUNT: ∗∗∗∗
• HEAD UP/DOWN COUNT:
• RIBBON WORK TIME:
• SOLENOID WORK TIME:
• RS-232C ERROR COUNT:
• SYSTEM ERROR COUNT
• POWER FAILURE COUNT:
Examples for status display are shown on the following pages.
(Total label distance covered)
(Label distance covered)
(Print distance)
(Cut count)
∗∗∗∗ (Head up/down count)
∗∗h
(Ribbon motor drive time)
∗∗h
(Head-up solenoid drive time)
∗∗∗∗ (RS-232C communication error count)
∗∗∗∗ (System error count)
∗∗∗∗ (Momentary power interruption count)
- 10 -