Toshiba TEC B-SX4T Network Specification page 24

(3) Operation
The printer performs the following operation:
1) The printer always monitors the PRTDATA folder. Files stored in the PRTDATA folder
are recognized as real-time print jobs.
PRTDATA, the printer:
1. Transfers the print data.
2. After transferring the print data, moves the file from the PRTDATA folder to the
PRTEND folder as a completed job.
If there are two or more files in the PRTDATA folder, the printer transfers print data of
them in succession, by repeating steps 1 and 2.
2) When receiving a request to delete a real-time print job, which is sent from the browser,
the printer deletes the file from the PRTDATA folder.
3) Files stored in the PRTPOOL folder are recognized as spooled print jobs. They are
stored in the PRTPOOL folder until the printer receives a request to print from the
browser. When receiving a request to print, the printer moves the file from the
PRTPOOL folder to the PRTDATA folder as a real-time print job, and performs the
operation as in 1 above.
4) When receiving a request to delete a spooled print job, which is sent from the browser,
the printer deletes the file from the PRTPOOL folder.
5) Files in the PRTEND folder are recognized as completed jobs, and are stored in the
PRTEND folder. When receiving a request to reprint a completed job, the printer moves
the file from the PRTEND folder to the PRTDATA folder as a real-time print job, and
performs the operation as in 1 above.
6) When receiving a request to delete a completed job, which is sent from the browser, the
printer deletes the file from the PRTEND folder.
7) When receiving a request to print all print jobs, which is sent from the browser, the
printer moves all spooled print jobs from the PRTPOOL folder to the PRTDATA folder
as real-time print jobs, and performs the operation as in 1 above repeatedly to print all
spooled print jobs.
8) When receiving a request to delete all print jobs, the printer deletes all files from the
PRTPOOL and PRTEND folders.
9) The spooler function screen is always updated at intervals of seconds specified in the
"http.ini" file. The spooler function screen displays the printer status, the remaining
number of print data to be transferred, the remaining memory capacity of the ATA card,
print jobs, the [All Issue] button, and the [All Delete] button.
The moment when a file is stored in the
- 21 -