Toshiba TEC B-SX4T Network Specification page 27

(6) Operation example
When the [Delete] button placed on the right of "DATA.TXT" is clicked, "DATA.TXT" is
deleted.
When the [Issue] button placed on the right of "DATA2.TXT" is clicked, the print data of
"DATA2.TXT" is transferred (Spooling...). After being transferred, "DATA2.TXT" becomes a
completed job (Data Transfer Complete).
When the [Delete] button placed on the right of "DATA2.TXT" is clicked, "DATA2.TXT" is
deleted.
When the [Reissue] button place on the right of "DATA4.TXT" is clicked, the print data of
"DATA4.TXT" is transferred (Spooling...). After being transferred, "DATA4.TXT" becomes a
completed job again (Data Transfer Complete).
When the [Delete] button placed on the right of "DATA4.TXT" is clicked, "DATA4.TXT" is
deleted.
When the [All Issue] button is clicked, all spooled print jobs are printed. According to the
screen, "DATA2.TXT" and "DATA3.TXT" are printed. The print data of "DATA2.TXT" and
"DATA3.TXT" are transferred in succession (Spooling...).
"DATA2.TXT" and "DATA3.TXT" become completed jobs (Data Transfer Complete).
If there are two or more spooled print jobs when the [All Issue] button is clicked, the print data
of spooled print jobs is transferred in succession (Spooling...). After being transferred, print
jobs become completed jobs in the order in which the print data is transferred (Data Transfer
Complete).
When the [All Delete] button is clicked, all spooled print jobs and completed jobs are deleted.
According to the screen, three jobs "DATA2.TXT", "DATA3.TXT", and "DATA4.TXT" are
deleted.
Immediately when a print job is stored in the PRTDATA folder, "Spooling..." is displayed as
the job status.
Immediately when a print job is stored in the PRTPOOL folder, "Unissued Data" is displayed
as the job status.
NOTE: For explanations about the screen, refer to the screen on
the previous page. Descriptions inside the parentheses
indicate job statuses.
- 24 -
After being transferred,