Mail Reception Specifications; Setup - Toshiba TEC B-SX4T Network Specification

10.5 MAIL RECEPTION SPECIFICATIONS

10.5.1 Setup

(1) Register the printer account in the mail server.
(2) Describe the required information for mail reception in the setup file.
The setup file should be saved as "pop3.ini" in the "mail" folder in the ATA card.
How to describe the setup file is as follows:
• IP address setting of the mail server
Format
Set the IP address of the mail server.
• Port for POP3
Format
Set the port to be used for POP3. Normally, "110" should be set.
• Mail account of the printer
Format
Set the mail address of the printer. Max. 300 bytes are available.
• Password for the mail account of the printer
Format
Set the password for the mail account of the printer. Max. 300 bytes are available.
• Mail check interval
Format
Set the interval that the printer checks for new e-mail every what seconds
HOST_IP=123.456.789.012
PORT=110
USER=bsx
PASSWORD=barcode
CHECKINTERVAL=10
Range: 0 to 42,949,672 sec. (= Approximately 12,000 hours)
- 42 -