Toshiba TEC B-SX4T Network Specification page 28

NOTES: 1. The printer updates the spooler function screen at intervals of seconds specified in
the "http.ini" file.
attempted, the printer status, "Data Transfer Complete" may be displayed without
displaying "Spooling...". This is because the data has already been transferred
when the spooler function screen was updated.
Even if the timing of updating the screen is off when data transfer is completed, the
printer status, "Spooling..." may be displayed, not "Data Transfer Complete". This
is because the spooler function screen was not yet updated, even though the data
had already been transferred.
2. The printer updates the spooler function screen at intervals of seconds specified in
the "http.ini" file. Therefore, if the timing of updating the screen is off, the spooler
function screen may not display the latest information. In this case, if you click the
button on the browser, the printer may not work properly, because there is no
applicable file on the printer, even though it is displayed on the browser. See an
example below:
Example: Update interval = 10,
1. The spooler function screen is updated. The "DATA.TXT" file is displayed as a
spooled print job.
(Since the update interval is 10, the spool function screen is not updated until
10 seconds have elapsed.)
2. During the 10 seconds until the spooler function screen is updated, the
"DATA.TXT" file is deleted by using the FTP function. At this time, the spool
function screen is not yet updated. Therefore, the "DATA.TXT" file is still
displayed as a spooled print job.
3. Then, if you click on the [Issue] button on the browser to print the "DATA.TXT"
file before the screen is updated, the printer does not print it, since there is no
"DATA.TXT" file.
When the update interval is set to a large number of seconds on the "http.ini" file,
such case may happen. It is preferable that the spooler function screen is manually
updated, before clicking on a button on the browser.
3. If the security level of Internet Explorer is set to "High", the message below appears
and operations for the spooler function screen are not performed properly.
Example: When clicking on a button on the spooler function screen, the dialog
If the timing of updating the screen is off when printing is
The "DATA.TXT" file is stored in the PRTPOOL folder.
below appears.
- 25 -