Rp-Sma Connectors; For More Information - Digi Connect Wi-Wave Hardware Reference Manual

A B O U T T H E D E V E L O P M E N T B O A R D
U.FL and RP-SMA connectors
on the development board and the other end of the cable to connector P2 on the
Digi Connect Wi-Wave module.
RP-SMA Wi-Fi antennas are attached to the two RP-SMA connectors, J1 and J2.
RP-SMA
connectors
Single antenna configuration: Attach an RP-SMA antenna to RP-SMA connector J1.
Dual antenna configuration: Attach RP-SMA antennas to both RP-SMA connectors J1
and J2.
For more For information about the antenna(s), see Chapter 3, "Using the Antenna."
information
Connect Wi-Wave Hardware Reference, Rev A 2/2008
26