Markings Used; Symbols On The Transducer; The Markings Used In This Document - HBM PW15iA Mounting Instructions

Markings used

2 Markings used
Symbol
WARNING
Notice
8
2.1

Symbols on the transducer

CE mark
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the rele­
vant EC directives (the Declaration of Conformity can be
found on the HBM website (www.hbm.com) under
HBMdoc).
Statutory waste disposal mark
In accordance with national and local environmental pro­
tection and material recovery and recycling regulations,
old devices that can no longer be used must be disposed
of separately and not with normal household garbage.
Also see Section 9, Page 32.
2.2

The markings used in this document

Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to property.
Significance
This marking warns of a potentially dangerous situa­
tion in which failure to comply with safety require­
ments can result in death or serious physical injury.
This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
A4359-1.0 HBM: public
PW15iA