Install The Liquid Material Vat In The Modeling Machine - Roland monoFab ARM-10 User Manual

Install the Liquid Material Vat in the Modeling Machine

Install the "Liquid material vat"
NOTE
Use different liquid material vats depending on the type of resin you are using. To purchase a new liquid material vat, contact your authorized Roland DG Corp.
dealer.
1.
Open the front cover.
2.
Loosen the liquid material vat retaining screws.
(p. 10) that is filled with job material (resin) in the "Liquid material vat holder"
22
(p. 10).
Corresponds to [monoFab Player AM Ver.1.40]
Output (Printing)
or later