Table of Contents
Advertisement
When Moving the Machine
When moving the machine, secure the UV irradiation outlet shutter, and tape the front cover down.
Required items
Retainer (large): 1
Retainer (small): 2
NOTE
Use the original retainers that were supplied when the product was delivered. If the original retainers are no longer available, use an alternative that is capable of
holding the UV irradiation outlet shutter in place. If the retainers are not attached or the cover is not taped down, the machine may be damaged.
1.
Place the large retainer on top of the UV irradiation outlet shutter.
Fix the shutter in place so that it does not open. Insert the large retainer into the center of the recess in the irradiation outlet.
If you are not using the original retainers, use an alternative, taking care to ensure that the shutter does not open.
Retainer (large)
Shutter
62
Corresponds to
[monoFab Player AM Ver.1.40]
Appendix
or later
Advertisement
Table of Contents
