Table of Contents
Advertisement
MEMO
An ultrasonic cleaner (commercially available) can also be used for washing.
Ethanol (Commercially
available)
Ultrasonic cleaner
(Commercially available)
1.
Put the removed job in a beaker.
2.
Put ethanol in the beaker.
Lower the removed job into the ethanol until it is entirely submerged.
3.
Put water into the ultrasonic cleaner container and partially submerge the beaker in it.
4.
Wash in the ultrasonic cleaner (1 to 2 minutes).
MEMO
•
For information on how to use the ultrasonic cleaner, refer to the instruction manual included that it came with.
•
Use an ultrasonic cleaner that produces a frequency of 40 to 45 kHz.
•
If the ethanol in the beaker changes color, replace it and wash the job again.
5.
Stop the ultrasonic cleaner and remove the job.
6.
Wipe the ethanol off the job.
Beaker (Commercially
available)
Job
Water
43
Corresponds to
[monoFab Player AM Ver.1.40]
Output (Printing)
or later
Advertisement
Table of Contents
