Table of Contents
Advertisement
Attach Supports
"Supports"
"reinforcing members"
are
the effects of gravity. monoFab Player AM can automatically add supports to objects.
[Generate Supports]
button
[Supports]
MEMO
Supports are required when making objects like those described below.
Objects where the center of
gravity is heavily skewed
Objects where the size of
the job is large relative
to the area touching the
printing platform
•
If multiple objects are positioned in the work area, supports are added both to a single object and to multiple objects. For details, see the monoFab Player AM
Help.
added to data that support the job. They can prevent the job from falling into the liquid material vat or deforming due to
tab
Supports are attached to the object.
Objects where the job does not touch the
printing platform (i.e. where the bottom
plane of the object does not touch the
plane Z = 0)
*
If the object does not touch the
printing platform, it must be moved so
that it does touch the printing platform
or supports must be added.
20
Corresponds to
[monoFab Player AM Ver.1.40]
Output (Printing)
or later
Advertisement
Table of Contents
