Inside The Front Cover - Roland monoFab ARM-10 User Manual

Inside the Front Cover

1
2
3
4
5
Number Name
1
Z axis unit (inside red box)
2
Printing platform handle
6
3
Shutter lever
7
8
4
UV irradiation outlet (with shutter)
9
5
Liquid material vat stopper
10
6
Printing platform retaining screw
11
7
Z0 adjustment screw
8
Printing platform
9
Liquid material vat
10
Liquid material vat retaining screws
11
Liquid material vat holder
10
Explanation
The device that moves the printing
platform.
Used to install and remove the printing
platform.
By installing the liquid material vat,
the UV irradiation outlet shutter on
the bottom of the liquid material vat is
opened.
When the shutter opens, UV rays are
emitted from the machine.
Secures the liquid material vat in place.
When the stopper is disengaged, the
liquid material vat moves toward you.
The screw that secures the printing
platform.
When setting the initial printing height
(Z0), loosen the Z0 adjustment screws
(p. 26).
The part on which the job is created.
The job is printed while the printing
platform is raised.
The container to which resin for
modeling is added.
Screws for securing the liquid material
vat holder.
Screws for securing the liquid material
vat.
Corresponds to [monoFab Player AM Ver.1.40]
Part Names
or later