Step 2: Install The Liquid Material Vat In The Machine - Roland DWP-80S User Manual

Step 2: Install the Liquid Material Vat in the Machine
Install the Liquid material vat (P.7) that is filled with job material (resin) in the Liquid material vat holder (P.7).
I m p o r t a n t
Use different liquid material vats depending on the type of resin being used Contact your authorized Roland DG
Corp. dealer or visit the Roland DG Corp. website (http://www.rolanddg.com/) to purchase liquid material vats.
Procedure
A
Open the front cover.
B
Loosen the liquid material vat retaining screws.
C
Insert the liquid material vat.
Liquid material vat
1. Preparing the Machine
Push in the liquid material vat
until its edge gently touches
the shutter lever.
Chapter 2 Output
17