Table of Contents
Advertisement
Main Specifications
Specification Table
Build technology
Build size
Build speed
Light source
XY resolution
Z axis resolution
Machine
Power
Dedicated AC adapter
Power consumption
During operation
Acoustic noise
level
During standby
Dimensions
Weight
Interface
During operation
Installation
environment
Not operating
Accessories
Supplies (sold separately)
*
1. The maximum weight of a job varies according to the type of resin. For more information, contact your authorized Roland DG Corp. dealer .
*
2. When using PRH35-ST2 resin. The build speed varies according to the type of resin used.
ARM-10
Layer projection system
130 (W) x 70 (D) x 70 (H) mm, 5.1 (W) x 2.7 (D) x 2.7 (H) inches (The maximum resin volume for use is 300 g.*
2
12 mm/h (Layer pitch = 0.15 mm)*
UV-LED (ultraviolet light emitting diode)
0.2 mm
0.01 mm
DC 24 V, 0.6 A
AC 100 V to 240 V ±10 %, 50/60 Hz
15 W
55 dB (A) or less
49 dB (A) or less
430 (W) x 365 (D) x 450 (H) mm, 17.0 (W) x 14.4 (D) x 17.8 (H) inches
17 kg, 37.5 lbs
USB
Temperature of 20 to 30°C, 68 to 86°F, 35 to 80% relative humidity (no condensation)
Temperature of 5 to 40°C, 41 to 95°F, 20 to 80% relative humidity (no condensation)
AC adapter, Power cord, USB cable, Liquid material vat, Printing and washing tools (Metallic spatula, Plastic spatula, Tweezers, Washing
container x 2, Hexagonal wrench, Spanner, Rubber gloves, Work tray, etc.), Start-up page information card, Read this first (Booklet).
Resin (350 g bottle), Liquid material vat
65
1
)
Corresponds to
[monoFab Player AM Ver.1.40]
Appendix
or later
Advertisement
Table of Contents
