Table of Contents
Advertisement
3.
Wash the job by gently swishing it around in the ethanol using the tweezers.
MEMO
If the ethanol changes color, replace it and the container, and wash the job again by gently swishing it around in the ethanol.
4.
Remove the job
5.
Wipe the ethanol off the job.
MEMO
Surplus resin may remain depending on the shape of the job. Bottles and objects with similar shapes are particularly prone to surplus resin remaining in the
bottom of the cylinder. If there is surplus resin remaining, remove it carefully with a brush or similar tool, or wash it out using an ultrasonic cleaner (p. 43).
42
Corresponds to
[monoFab Player AM Ver.1.40]
Output (Printing)
or later
Advertisement
Table of Contents
