Roland monoFab ARM-10 User Manual page 58

Windows 10
5.
From the [View] menu, click
6.
In the list, find [Printers]
below the item you selected, click it to choose it.
7.
Go to the [Action] menu, and click [Uninstall].
8.
In the "Confirm Device Uninstall"
window, select [Delete the driver
software for this device.], then click
[OK].
Close the [Device Manager].
9.
Detach the USB cable connected to the printer, and restart Windows.
10.
Uninstall the driver according to the procedure in
11.
Reinstall the driver again following the driver installation procedure.
"driver installation procedure,"
"For information on the
Windows 8.1
[Show hidden devices].
or [Other devices], then double-click it. When the model name you are using or
8.
In the "Confirm Device Uninstall"
device.], then click [OK].
The [Device Manager]
"Uninstalling the Driver"
refer to the
Windows 7
window, select
will close automatically.
(p. 59).
"Roland DG Start-up page"
(http://startup.rolanddg.com/).
58
"Unknown device"
[Delete the driver software for this
Corresponds to [monoFab Player AM Ver.1.40]
Appendix
appears
or later