Machine - Roland monoFab ARM-10 User Manual

How to Configure Display Settings Appropriately for the Machine
Configure the computer's display settings so that they are suitable for printing with this machine. If the following settings are not configured appropriately, data
output may stop and printing will not be possible.
1.
Log on to Windows "as an administrator."
2.
[Control Panel].
Display the
[Start]
Windows 10: Right-click the
Windows 8.1: Point to the lower-right corner of the screen to display the charms, click [Settings], and then click
[Start]
Windows 7: From the
3.
Configure each of the following items.
Item Setting
1.
Multiple displays
2.
1.
Turn off the display
2.
1.
Put the computer to
sleep
2.
1.
Screen saver
2.
button , and then click
[Control Panel]
menu, click
When displayed by "category": [Appearance and Personalization]
When not displayed by "category":
Set the "Multiple displays" setting to
When displayed by category: [Hardware and Sound]
When not displayed by category: [Power Options]
Set the "Turn off the display" setting to
[Hardware and Sound]
When displayed by category:
When not displayed by category: [Power Options]
Set the "Put the computer to sleep"
When displayed by category: [Appearance and Personalization]
[Personalization]
When not displayed by category:
Set the "Screen saver" setting to "(None)."
[Control Panel].
> [Display]
[Display] > [Adjust screen resolution]
"Extend these displays."
> [Power Options]
> [Change when the computer sleeps]
"Never ."
[Power Options]
>
> [Change when the computer sleeps]
setting to "Never ."
> [Personalization]
[Screen Saver]
>
13
[Control Panel].
> [Adjust screen resolution]
> [Change when the computer sleeps]
[Change when the computer sleeps]
>
> [Screen Saver]
Corresponds to [monoFab Player AM Ver.1.40]
Basic Operation
or later