Table of Contents
Advertisement
Use Advanced/Useful Functions
Print Multiple Objects Simultaneously
Positioning multiple jobs so that they fit in the machine's work area lets you print them simultaneously.
The maximum printable size (work area) is 80 (W) x 80 (D) x 80 (H) mm (3.15 (W) x 3.15 (D) x 3.15 (H) in.).
" P. 26 "Recommended Layout"
M E M O : Improved production effi ci ency
With the layer exposure method, printing time is largely unaffected (depending on the number of jobs printed
simultaneously), making it possible to improve production efficiency.
I mp ort an t
Do not allow the object to become tilted. If the object is positioned at an angle in any direction, the object may
fall over and cause printing to fail.
Increase or Decrease the Number of Supports
In most cases it will not be necessary to change these settings in order to print.
Procedure
A
Click
.
B
Click [Advanced Settings].
The [Advanced support settings] dialog box appears. Increase or decrease the number of supports to
match the size and shape of the job.
Standard
More
Less
The standard number of supports is set according to the selected application
and other factors including the size and angle of the job. Use this setting in most
cases.
More supports will be used than are used with "Standard." Select this setting if
the job is tilted or not raised sufficiently with the number of supports provided
with "Standard."
Fewer supports will be used than are used with "Standard." Select this setting if
the job is sufficiently raised with fewer supports than are provided with "Standard."
Chapter 2 Output
41
Advertisement
Table of Contents
