Installing A New Cpu Module - Sun Microsystems Sun Blade 1000 Module Installation Manual

Installing a New CPU Module

Caution – Perform the procedures described in Table 1 when unpacking a new CPU
module from its packing carton.
CPU Module Handling Procedures
TABLE 1
Step
1
2
3
4
5
Sun Blade 1000 and Sun Blade 2000 UltraSPARC III Cu CPU Module Installation Guide
Use proper ESD grounding techniques when handling components.
Wear an antistatic wrist strap and use an antistatic mat. Store ESD-
sensitive components in antistatic bags before placing them on any
surface.
When you remove the CPU module from its packing carton, use
both hands to support the module along its sides.
As you remove the module from its antistatic bag, handle it only by
its captive screws. Do not touch the connectors on the bottom edge
of the module. The connectors for the module are easily bent or
damaged by improper handling.
Do not remove the plastic cover from the CPU module connectors
until you are ready to install the module into the workstation.
Do not grip the module by the heat sink.
Description
19