Safety; General - DAL-BO MaxiCut 200 Instruction Manual

This symbol appears in the instruction manual each time there is a safety
warning concerning your safety, the safety of others or functionality of the
machine. All safety instructions must be observed and made available to all
users of the machine.

General

• Ensure you are familiar with all aspects of the machine before use
• There are safety stickers on the machine containing important instructions
• Do not carry passengers during operation or transport.
• Ensure there are no personnel within the machine's working radius before
• When retracting MaxiCut, ensure that the side sections are locked using
• Before leaving the tractor or making adjustments, performing mainten-
• Remember to secure support leg and pins with split rings.
• Never leave driver's seat whilst machine is moving.
• Always adapt speed to conditions.
• Do not use machine unless all safety devices are in place. Defective safety

Safety

for the safety of yourself and others, and correct use of the machine.
operating. Operate machine only from inside the tractor.
the chain provided before leaving the field. Check all control handles are
secured against accidental operation.
ance or repairs on the machine, extend fully and lower to ground, or main-
tain in transport position, apply tractor handbrake, switch engine off and
remove ignition key to secure the machine against accidental operation.
devices must be replaced immediately.
MaxiCut
Side 7