Authorized Service Centers - Fluke 6055 User Manual

Calibration bath

Hide thumbs

Table Of Contents

Table of Contents

6055 Calibration Bath

User's Guide

1.3

triple point of water checks. Never immerse a wet or cold PRT into a bath

filled with hot fluid. Severe damage to the PRT may result as well as per-

sonal injury to the calibration technician.

This bath is not designed to be portable. Therefore, moving the bath once

it has been installed should be kept to a minimum. NEVER MOVE A

BATH THAT IS FULL OF HOT FLUID. This action could be ex-

tremely dangerous and could result in personal injury to the person mov-

ing the bath. The fluid can splash causing injury or if the bath tips, the hot

fluid could cause damage to the surrounding area and personnel.

If the bath must be moved, allow the salt to solidify and cool. Care must

be used when moving the bath with the fluid solidified in the bath. The

control probe can easily be damaged. Four people are required to safely

move the bath.

The control probe must be inserted through the lid into the bath fluid and

plugged into the socket at the back of the bath. DO NOT operate the bath

without the control probe properly inserted and attached. The bath will

not operate correctly without the control probe. Injury to operating per-

sonnel and permanent damage to the bath could occur.