Table of Contents
Advertisement
917X Series Metrology Wells
Getting Started
Immunity Testing
Emission Testing
Low Voltage Directive (Safety)
Authorized Service Centers
6
1.888.610.7664
The instrument was designed specifically as a test and measuring device. Compliance to the EMC
directive is through IEC 61326-1 Electrical equipment for measurement, control and laboratory
use – EMC requirements (1998).
As noted in the IEC 61326-1, the instrument can have varying configurations. The instrument was
tested in a typical configuration with shielded RS-232 cables.
The instrument was tested to the requirements for laboratory locations.
The instrument fulfills the limit requirements for Class A equipment but does not fulfill the limit
requirements for Class B equipment. The instrument was not designed to be used in domestic
establishments.
In order to comply with the European Low Voltage Directive (73/23/EEC), Fluke's Hart Scientific
Division equipment has been designed to meet the IEC 1010-1 (EN 61010-1) and the IEC 1010-2-
010 (EN 61010-2-010) standards.
Please contact one of the following authorized Service Centers to coordinate service on your Hart
product:
www.calcert.com
15
10
20
5
25
0
30
sales@calcert.com
Advertisement
Table of Contents
