Table of Contents
Advertisement
ADVANCED FEATURES
Changing the Batch Transmission On/Off
In a new machine, this setting is "On". If you wish to change this setting, use the
following procedure. (See page 184 if you need more information about the User
Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
3. The settings for switch 00 are now
shown on the bottom line of the display.
4. Press until the settings for Switch 06
are shown.
The setting that you need to change is
digit 4.
5. If you wish to change the setting, press
4 of the ten key pad.
6. Finish: Yes and Function .
Well Log Transmission
Using this feature, you can transmit a document that is longer than the maximum
limit, without having to cut it up into separate sheets. However, you must contact
a service technician to have this feature switched on. The name of this feature is
taken from oil well borehole surveying. A well log is a vertical profile of a
borehole, drawn to scale, showing important data. A well log can be several
yards long.
CAUTION: If this feature is switched on permanently, users must stay by the machine while
their documents are being scanned. This is because, if the document jams, the
machine may take much longer than usual to recognize the jam; this could result
in excessive wear and tear of the mechanical components of the scanner.
If a jam does occur, press the Stop key immediately.
.
Digit 4(Double Underlined)
0: Batch Transmision off
1: Batch Transmission on
TRANSMISSION
79
Advertisement
Table of Contents
