Ricoh FAX3800L Operator's Manual page 40

ROUTINE OPERATION
Home Position Setting Adjustments
For the contrast, resolution, and halftone, you can select whether the settings
return to home position at the end of transmission (in a new machine, they do).
Also, you can change the home positions of these settings.
If you need other adjustments, contact a service representative.
The procedure is as follows (see page 184 if you need more information about
the User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
At this time, you can print a User
Parameter List if you press
2. Yes.
3. The settings for switch 00 are now
shown on the bottom line of the dis-
play.
The settings that you may need to change are those for digits 0, 1, 2, 3, 4, 5,
6, and 7. The functions of these are as follows.
Digit
0 Stamp
Contrast home position
1
2
3 Do not change this setting.
Resolution home position
4
5
Tramsmission mode home position
6
0: Memory transmission*
7 Halftone on/off home position
*
Factory setting

and Start.
Purpose
Digit 2 Digit 1 Setting
0 0 Normal*
0 1 Lighten
1 0 Darken
Digit 5 Digit 4 Setting
0 0 Standard*
0 1 Detail
1: Immediate transmission
SENDING A FAX MESSAGE
  0

 
 1   


Digit
The digits are numbered from 7 to
0; the setting of digit 7 is shown at
the left side of the display and digit
0 is at the right.
0: Off*
Digit 5 Digit 4 Setting
1 0
1 1
0: Off*






       

7 6 5 4 2 1 0
1: On
Fine
Do not change these
settings.
1: On
29