Ricoh FAX3800L Operator's Manual page 97

RECEPTION
If you wish, you can prevent unidentified senders from sending you messages while Memory
Lock is on. See page 88.
Programming Special Terminals for Lock in Memory
If you like to receive information from only select locations into Memory lock, you
can program the RTI codes or CSI codes of those locations. A terminal sending
an incoming messages always identifies itself to your terminal. The identification
consists of an RTI or a CSI. When you specify the senders for Memory lock, you
must program a list of these codes. Program the list using Function 81 called
"Special Terminals" (See page 133).
Selecting Which Messages to Lock in Memory
You have to select either to:
Only Lock messages from Special Terminals.
Lock all messages except those from Special Terminals.
1. Function 6 2 2 2 2 6 3 and Yes.
At this time, you can print a User Pa-
rameter List if you press  and Start.
2. Yes.
3. The settings for switch 00 are now
shown on the bottom line of the display.
4. Press
until the settings for switch 09
are shown.
5. The setting that you need to change is
that for digit 1 (Double underlined).
Set as shown opposite.
86
ADVANCED FEATURES

 


  ## $#### ####

  #% $ #### ####
When you want to lock incoming mes-
sages in memory from specified termi-
nals;

  
If you lock all incoming messages ex-
cept those from specified terminals;