Table of Contents
Advertisement
ON/OFF SWITCHES AND USER PARAMETERS
4. Either:
Scroll through the switches with and until the required switch appears.
Then go to step 3.
Finish: Yes and Function.
The user parameter switches are outlined below (* Factory setting).
Switch 00 - Home position settings
Digit
0
Stamp
Contrast home position
1
2
3
Do not use this setting.
Resolution
4
5
Transmission mode
6
7
Halftone
Switch 01
Digit
0 to 6
Do not change these settings.
If you change any of the contrast, resolution, transmission mode, stamp, or halftone
setting before making a transmission, then:
7
0: The setting(s) will not return to the home position after the transmission.
1: The setting(s) will return to the home position after the transmission.*
Switch 02 - Printing of various items on received messages
Digit
Mark to be printed at the receiving side to distinguish messages that are sent from
your machine when it is acting as a forwarding station.
0
0: Off
Center mark
1
The center mark is not printed when the machine is used for making copies
2
Reception time
3
TSI printing
4
Checkered Mark
5 to 7
Do not change these settings.
186
0: Off *
Digit 2 Digit 1 Setting
0
0
Normal *
0
1
Lighten
1
0
Darken
Digit 5 Digit 4 Setting
0
0
Standard*
0
1
Detail
0: Memory transmission*
1: Immediate transmission
0: Off*
Forwarding Mark
1: On *
TECHNICAL REFERENCE
Purpose
1: On
Digit 5 Digit 4 Setting
1
1
1: On
Purpose
Purpose
0: Off*
0: Off*
0: Off*
0: Off
0
Fine
1
Do not use this.
1: On
1: On
1: On
1: On*
Advertisement
Table of Contents
