Table of Contents
Advertisement
INSTALLING THE PHOTOCONDUCTOR, TONER CASSETTE AND CLEANING PAD
6. Pull out the transparent sheet from the side of the cassette, then remove the
black sheet from the front.
7. Slide the toner cassette into the machine
as far as it will go. Gently push down
the cassette to secure it in place.
8. Install the cleaning pad as shown in the il-
lustlation.
Match the position of the arrow on the
cleaning pad with the arrow on the in-
side the machine.
Note: Push the cleaning pad until you
hear it clicking.
Important: Do not forget to install the
cleaning pad. If not fitted
correctly, damage may
caused to the machine.
9. Close the upper cover and the operation
panel.
Note: If the top cover does not close,
the toner cassette, photoconduc-
tor or cleaning pad is not cor-
rectly installed.
10. Fix the cassette cover on the rear side
of the machine as shown opposite.
194
APPENDIX
Advertisement
Table of Contents
