Command Page - Eaglemaster E2 Instruction Manual

1-Way & 2-Way Remote Function Table:
Functions
Arm and door lock
Arm without siren chirp
Disarm and door unlock
Disarm without siren chirp
Trunk open
Anti car-jack mode
Panic mode
Car search mode
1st stage sensor bypass
2nd stage sensor bypass
Valet mode
Vehicle status check
Remote button 1.2.3 on/off
Silent arm mode
Vibrate mode on/off
Disable remote receiving
2-way signal paging features
A page is the signal the control module sends to the remote controls confirmation of
receipt of a command or alarm system status. When the remote control receives a page
it will generate a page notification to the user (notifications are audible beeps) and the
LED Icons will display the current system status.

Command Page

When a command (arm/disarm, or auxiliary channel) from the remote control is sent
and received, the system will send a command page back to confirm receipt.
Display
1-flash
2-flash
fast flash every 2sec.
2-flash every 2sec.
2- flash every 2sec.
1-flash per second.
Step
Press once
Press once then within 3sec. press
Press once
Press once then within 3sec. press
Press over 2sec
Press over 2sec..
Press over 2sec.
Press once after 8sec. of armed
Press once within 8sec. of armed
Press once within 8sec. of armed
Press together over 2sec.
Press once
Press over 2sec.
Press once (press
Press over 2sec.
Press together over 2sec.
Beeps
1 short
2 short
1 short
1 short
Melody
-3-
once
once
once, 1-way 4button)
Vehicle Status
Armed / Door locked
Disarmed / Door unlocked
Trunk opened
Passive immobilizer mode
Turbo mode (Engine running)
Panic mode (activated in disarm position)
Condition
Disarmed & ACC off
Disarmed & ACC off
Armed
Armed
Any time
ACC ON
Armed
Armed
Armed
Armed
ACC ON
Armed & Disarmed