Eaglemaster E2 Instruction Manual page 3

2-way LED Remote Transmitter Description
Arm/Disarm
indicator (Red)
Hood/Trunk
indicator (Orange)
Door indicator (Yellow)
Button 1
Button 2
Button 3
System maintenance
This system needs no specific maintenance beyond 2-wayremote control battery
replacement. The 2-way remote is powered by a 1.5V AAA battery.
Low Battery Notification
If the battery becomes exhausted, the remote will emit extra long beep, and indication
the melody (same melody while battery on ). While press any button on the remote, few
seconds later the
Battery Replacement
Gently pull the end of the battery door away from the top of the remote control then
slide the door up to expose the battery and remove the expired battery. Place the new
battery into the remote control observing the correct polarity. When power is returned
the remote control will light all icons and generate melodies (representing all beeper
tones).
1-Way Remote Transmitter Description
LED indicator
NO:
TX-3D
indicator will flashing for identify.
Button 1
Button 2
Button 3
NO:
TR-4LED
(optional 3 & 4 button available)
LED indicator
NO:
TX-4R
-2-
Shock sensor
indicator (Green)
Ignition/immobilizer
indicator (Red)
Receive/Transmit
indicator(Blue)
Button 4
Low battery
indicator(Red)
Button 5
Button 1
(Arm / Door lock)
Button 2
(Disarm / Door unlock)
Button 3
(Trunk open)
Button 4
(Silent arm mode)