Avaya ERS 3500 Series Manual page 47

Table 24: 10GBASE-CX cables
Cable length
3 meter
5 meter
10 meter
10GBASE-ZR/ZW SFP+ specifications
The following table lists the transmit and receive specifications for the 10GBASE-ZR/ZW SFP+
transceiver. The part number of this SFP+ transceiver is AA1403016-E6.
Warning:
Risk of BER increase
For proper SFP+ transceiver operation, ensure that at least 11 dB of attenuation is present
between the transmit and receive ports.
The reach for this SFP+ transceiver is up to 70 km* at a wavelength of 1550 nm.
Table 25: 10GBASE-ZR/ZW SFP+ specifications
Parameter
Line rate (nominal)
Distance
Link optical power budget
Dispersion power penalty
Minimum attenuation between transmit and receive
ports
Transmitter characteristics
Center wavelength range
Average launch power
Optical modulation amplitude (minimum)
Extinction ratio (ER) (minimum)
Maximum transmitter reflectance
Receiver characteristics
Wavelength range
Maximum receiver sensitivity (average power)
Maximum receiver (average) power, BER 10
Receiver damage threshold (average power)
Receiver reflectance (maximum)
July 2015
-12
Installing Transceivers and Optical Components on Avaya ERS 3500 Series
Comments on this document? infodev@avaya.com
Part number
AA1403019-E6
AA1403020-E6
AA1403018-E6
Specifications
10GBASE-ZR 10.3125 Gbps ±100 ppm (10 GbE)
Up to 70 km *
24 dB
3.0 dB at 70 km (G.652 fiber)
11 dB
1530 to 1565 nm, nominal 1550 nm
0 to 4.0 dBm
–1.7 dBm
8.2 dB
–12 dB
1280 to 1575 nm. Sensitivity specified for 1530 to
1565 nm.
–24 dBm
–7.0 dBm
+5.0 dBm
–27 dB
SFP+ specifications
47