Avaya ERS 3500 Series Manual page 42

SFP+
For more information about the 10GBASE-SR/SW SFP+ transceiver, including test and
measurement information, see the IEEE 802.3ae standard.
Caution:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation exists
between the transmit and receive ports.
The following table lists the specifications for the 10GBASE-SR/SW SFP+ transceivers. The part
number of this SFP+ transceiver is AA1403015-E6.
Table 19: IEEE 802.3ae 10GBASE-SR/SW SFP+ transceiver specifications
Parameter
Data rate
Line rate (64B/66B code)
Center wavelength range
Distance
Link optical power budget
Maximum transmitter and dispersion penalty
Transmitter characteristics
Root-mean-square spectral width
Launch power
Minimum extinction ratio
Maximum optical return loss tolerance
Receiver characteristics
Average receive power for BER 10
Receiver damage threshold
Maximum receiver sensitivity in OMA
Maximum receiver reflectance
Stressed receiver sensitivity in OMA
Installing Transceivers and Optical Components on Avaya ERS 3500 Series
42
Specifications
10 gigabits per second (Gbps)
10.3125 Gbps ± 100 parts per million (ppm)
840 to 860 nanometers (nm), nominal 850 nm
Using 62.5 µm MMF optic cable:
• 160 MHz-km fiber: 2 to 26 m
• 200 MHz-km fiber: 2 to 33 m
Using 50 µm MMF optic cable:
• 400 MHz-km fiber: 2 to 66 m
• 500 MHz-km fiber: 2 to 82 m
• 2000 MHz-km fiber: 2 to 300 m
• 4700 MHz-km fiber (OM4): 2 to 400 m
7.3 dB
3.9 dB at 300 m
0.05 to 0.40 nm
–7.3 to –1.0 dBm
3.0 dB
–12 dB
-12
–9.9 to –1.0 dBm
0 dBm
–11.1 dBm
–12 dB
–7.5 dBm
Comments on this document? infodev@avaya.com
July 2015