Avaya ERS 3500 Series Manual page 25

The part number for this model is AA1419043-E6.
The maximum current requirement of the SFP is 375 milliamperes (mA) at 5 volts (V).
The following table describes the 1000BASE-T SFP specifications.
Table 2: IEEE 802.3z 1000BASE-T SFP specifications
Parameter
Standards
Connectors
Cabling
Distance
100BASE-FX SFP specifications
The 100BASE-FX SFP provides 100 Mbps Ethernet Carrier Sense Multiple Access with Collision
Detection (CSMA-CD) connectivity using multimode optical fiber. The part number for this model is
AA1419074-E6.
The following table describes the 100BASE-FX SFP specifications.
Table 3: 100BASE-FX SFP specifications
Parameter
Maximum electrical power consumption
Connectors
Cabling
Distance
Wavelength
Link optical power budget
Transmitter characteristics
Maximum launch power
Minimum launch power
Receiver characteristics
Receiver sensitivity
Maximum input power
1000BASE-SX (LC) SFP specifications
The 1000BASE-SX SFP transceiver provides 1000BASE-SX gigabit Ethernet connectivity at 850 nm
using multimode optical fiber. This SFP supports only full-duplex operation. The part number is
AA1419013-E5*.
July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series
Comments on this document? infodev@avaya.com
Specifications
IEEE 802.3z, IEEE 802.3ab
RJ-45
CAT5E or better UTP
Up to 100 m
Specifications
1.5 W
Duplex LC
• 62.5 µm MMF optic cable
• 50 µm MMF optic cable
• Up to 2 km using 500 MHz-km MMF optic cable
1310 nm
10 dB
–14 dBm
–23.5 to –20 dBm
–33.5 dBm
—
SFP specifications
25