Avaya ERS 3500 Series Manual page 26

SFP
* This transceiver has reached end-of-life (EOL). After the inventory depletes, you can no longer
purchase this transceiver. Avaya recommends AA1419048–E6 as a replacement.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-SX
SFP transceivers.
Table 4: IEEE 802.3z 1000BASE-SX (LC) SFP specifications
Parameter
Connectors
Cabling
Distance
Wavelength
Link optical power budget
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum input power
1000BASE-SX (MT-RJ) SFP specifications
The 1000BASE-SX (MT-RJ) type SFP provides gigabit Ethernet connectivity using MT-RJ
multimode fiber connectors. The part number is AA1419014-E5*.
* This transceiver has reached end-of-life (EOL). After the inventory depletes, you can no longer
purchase this transceiver. Avaya recommends AA1419048–E6 as a replacement. You must use a
jumper cable to adapt the LC connector to the MT–RJ connector.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-SX
(MT-RJ) type SFP transceiver.
Table 5: IEEE 802.3z 1000BASE-SX (MT-RJ) SFP specifications
Parameter
Connectors
Cabling
Distance
Wavelength
Installing Transceivers and Optical Components on Avaya ERS 3500 Series
26
Specifications
Duplex LC
• 62.5 µm MMF optic cable
• 50 µm MMF optic cable
• up to 275 m using 62.5 µm MMF optic cable
• up to 550 m using 50 µm MMF optic cable
850 nanometers (nm)
7.0 deciBels (dB)
–10 to –4.0 dBm
–17 dBm
0 dBm
Specifications
Duplex MT-RJ
• 62.5 µm MMF optic cable
• 50 µm MMF optic cable
• up to 275 m using 62.5 µm MMF optic cable
• up to 550 m using 50 µm MMF optic cable
850 nm
Comments on this document? infodev@avaya.com
Table continues...
July 2015