Avaya ERS 3500 Series Manual page 30

SFP
Parameter
Maximum dispersion power penalty
Minimum attenuation between transmit and receive
ports
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum receiver power
1000BASE-ZX CWDM (LC) SFP specifications
The 1000BASE-ZX SFP transceiver provides CWDM gigabit Ethernet connectivity using single
mode fiber. This SFP supports only full-duplex operation. The part numbers of the 70 km models
range from AA1419033-E5 to AA1419040-E5.
Important:
For the 70 km CWDM SFP transceivers, a minimum attenuation of 10 dB must be present
between the transmitter and receiver.
Table 11: 1000BASE-ZX CWDM (70 km) SFP specifications
Parameter
Connectors
Cabling
Data rate
Line rate (8B/10B code)
Operating temperature range
Link optical power budget
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum input power
1000BASE-ZX DDI 1550 nm SFP specifications
The following table describes the 1000BASE-ZX CWDM SFP transceiver. This SFP transceiver
operates at 1550 nm and has a reach of up to 70 km. The part number is AA1419052-E6.
This transceiver has been discontinued and is no longer available for purchase. Avaya recommends
AA1419065-E6 as a replacement.
Installing Transceivers and Optical Components on Avaya ERS 3500 Series
30
Specification
2 dB at 40 km
3 dB
–2.0 to 3.0 dBm
–24 dBm
0 dBm
Specifications
Duplex LC
SMF, 9 µm
1.0 Gbps
1.25 Gbps
0 to 60°C
20 dB
–3.0 to 2.0 dBm
–23 dBm
–3.0 dBm
Comments on this document? infodev@avaya.com
July 2015