Avaya ERS 3500 Series Manual page 44

SFP+
Table 21: 10GBASE-LRM channel insertion loss and range
Fiber type (core diameter and OFL bandwidth)
62.5 μm (FDDI grade)
• 160 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
62.5 μm (ISO/IEC OM1)
• 200 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
50 μm (ISO/IEC OM2)
• 500 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
50 μm
• 400 MHz-km at 850 nm
• 400 MHz-km at 1300 nm
50 μm (ISO/IEC OM3)
• 1500 MHz-km at 850 nm (includes laser launch
bandwidth)
• 500 MHz-km at 1300 nm (includes laser launch
bandwidth)
The following abbreviations are used in the preceding tables:
• FDDI – Fiber Distributed Data Interface
• ISO – International Standards Organization
• IEC – International Electrotechnical Commission
• OFL – Over Filled Launch
10GBASE-LR/LW SFP+ specifications
The 10GBASE-LR/LW SFP+ transceiver provides 10 GbE or OC-192 service at a nominal
wavelength of 1310 nm. This SFP+ transceiver can attain link lengths of up to 10 km.
For more information about the 10GBASE-LR/LW SFP+ transceiver, including test and
measurement information, see the IEEE 802.3ae standard.
The following table lists the transmitter and receiver specifications for the 10GBASE-LR/LW SFP+
transceiver. The part number of this SFP+ transceiver is AA1403011-E6.
Installing Transceivers and Optical Components on Avaya ERS 3500 Series
44
Comments on this document? infodev@avaya.com
Range
Up to 220 m
Up to 220 m
Up to 220 m
Up to 100 m
Up to 220 m
Maximum channel
insertion loss
1.9 dB
1.9 dB
1.9 dB
1.7 dB
1.9 dB
July 2015