Avaya ERS 3500 Series Manual page 34

SFP
Table 16: 1000BASE-EX DDI SFP transceiver specifications
Parameter
Maximum electrical power consumption
Connectors
Cabling
Data rate
Line rate (8B/10B code)
Link optical power budget
Maximum dispersion power penalty
Minimum attenuation between transmit and receive
ports
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum receiver power
1000BASE DDI CWDM 70 km SFP specifications
The 1000BASE SFP transceiver provides CWDM gigabit Ethernet connectivity using single mode
fiber. This SFP transceiver supports only full-duplex operation.
Important:
For the 70 km CWDM SFP transceiver, a minimum attenuation of 10 dB must exist between the
transmitter and receiver.
The following table describes specifications for CWDM SFP transceivers numbered AA1419061-E6
to AA1419068-E6.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 8 dB of attenuation exists
between the transmit and receive ports.
Table 17: 1000BASE-ZX CWDM SFP DDI (70 km) specifications
Parameter
Maximum electrical power consumption
Connectors
Cabling
Data rate
Installing Transceivers and Optical Components on Avaya ERS 3500 Series
34
Specification
1.2 W
Duplex LC
SMF, 9 μm
1.0 Gbps
1.25 Gbps
30 dB
2.0 dB at 120 km
14 dB
0 to 5.0 dBm
–30 dBm
–9.0 dBm
Specifications
1.0 W
Duplex LC
SMF, 9 µm
1.0 Gbps
Comments on this document? infodev@avaya.com
Table continues...
July 2015