Making A Group Call In Tmo; Receiving A Group Call In Idle; Receiving A Group Call During An Ongoing Group Call - Motorola MTM800 FuG Feature User Manual

3.2.3 Making a Group Call in TMO

The Group Call is received by all members of the selected group who have their units turned on and are in range.
Procedure Steps
1 Press and hold the PTT button.
2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the PTT button to
listen.
To cancel making a group call, do one the following actions before the talk permit is granted (depending on
your service provider's settings):
When the call is canceled, your radio displays Call cancelled message (if configured by your service
provider).

3.2.4 Receiving a Group Call in Idle

Procedure Steps
The radio receives a Group Call.
1
The incoming Group Call is signalled by a Receiving Group Call tone.
To respond, press and hold the PTT button.
2

3.2.5 Receiving a Group Call during an Ongoing Group Call

While in active Group Call, your radio receives a Group Call with a higher priority.
One of the following occurs:
• Your radio is forced to end the current group call and automatically join the incoming one.
• Your radio displays incoming group call screen with options:
– Join — ends current Group Call and starts the incoming one.
– End — cancels the incoming Group Call.
-
• Release the PTT button.
• Press the END key (default).
3.2.3 Making a Group Call in TMO
3-3