Selecting A Range; Activating/Deactivating Scanning; Making A Group Call - Motorola MTM800 Feature User Manual

The terminal displays the talkgroup alias
added message and then returns to idle
state.
Adding a Group from the My Groups menu option
See "My Groups" on page 68.
Selecting a Group from the My Groups Range
See "My Groups" on page 68.

Selecting a Range

To select a range:
1. Press
2. Use
3. Press
in the new range)
The Service provider can configure range scrolling to:
• Stay in range — when the range end is reached during talkgroup
scrolling, further scrolling restarts the range talkgroup list.
• Scroll to next range — when the range end is reached during
talkgroup scrolling, further scrolling switches to the talkgroup list
in the next range.

Activating/deactivating Scanning

See "Setting Talkgroup Scanning" on page 79.

Making a Group Call

1. Press
You are now in Group mode. In this
example, "Range 3" is the last selected
range. "Service" is the last selected talkgroup.
2. If this is the required talkgroup and range, press the
Wait for the "Talk permit" tone (if configured) and then
speak into the microphone.
Release the
26
, Select the
Range
or to scroll through the ranges.
to confirm your selection (or PTT to start the call
.
.
button to listen.
PTT
option.
TG 101
added
2 Range
3 Scanning
Range 3
Service
.
PTT