Procedure Steps
From the home screen, press MENU key.
1
2
Select Setup → Active Accry Type.
Select one of the following:
3
• Control Head Accry — Higher priority is given to the microphone connected to the control head.
Applicable to RECH.
• Transceiver Accry — Higher priority is given to the microphone connected to the transceiver.
Applicable to RECH.
• Front Accry — Higher priority is given to the microphone connected to the front accessory connector.
Applicable to TSCH.
• Rear Accry — Higher priority is given to the microphone connected to the rear accessory connector.
Applicable to TSCH.
In case the PTT on any connected accessory is pressed, the highest priority is assigned to that accessory.
5.7.10 Volume Cntrl (Control)
This menu item allows you to determine which audio output device, speaker or earpiece, is being adjusted when
you turn the ROTARY KNOB.
5.7.10.1 Setting Volume Cntrl (Control)
Procedure Steps
1
From the home screen, press MENU key.
2
Select Setup → Volume Cntrl.
3
Select one of the following:
• Earpiece — By turning the ROTARY KNOB you control earpiece volume.
• Speaker — By turning the ROTARY KNOB you control speaker volume.
5.7.11 Accry (Accessory) Setup
This menu item allows you to manually configure audio accessories that do not install automatically after plugging
them in. Accessories intended for the control head and the transceiver differ and are configured separately.
-
5.7.10 Volume Cntrl (Control)
5-41