Configuring Control Head Accessories; Configuring Transceiver Accessories - Motorola MTM800 FuG Feature User Manual

Feature User Guide
One control head can support only one external speaker at the same time, either a speaker connected to the
control head, or to the transceiver. When you select one external speaker, the other becomes unselectable
from the menu.

5.7.11.1 Configuring Control Head Accessories

When and where to use:
Use this menu item to configure audio accessories for the control head.
Procedure Steps
From the home screen, press MENU key.
1
2 Select Setup → Accry Setup → CH Accry.
3 Select one of the following:
• GCAI Front-head — Contains a list of preconfigured accessories that can be connected to the front
connector on the RECH.
• Secondary Accry — Contains a list of preconfigured accessories that can be connected to Hearer
Speaker Microphone (HSM).
• GCAI Back-head — Contains a list of preconfigured accessories that can be connected to the back
connector on the RECH.
• Visor Mic Back-head — Contains a list of preconfigured visor microphones that can be connected
to the back connector on the RECH.
• Ext Speaker Back-head — Contains a list of preconfigured external speakers that can be connected
to the back connector on the RECH.
• Second Mic Cradle — Contains a list of preconfigured microphones that can be connected to the
TSCH cradle.
• Ext Speaker Cradle — Contains a list of preconfigured speakers that can be connected to the TSCH
cradle.
Lists of accessories are configured by your service provider.

5.7.11.2 Configuring Transceiver Accessories

When and where to use:
Use this menu item to configure audio accessories for the transceiver.
5-42 -