Motorola MTM800 FuG Feature User Manual page 29

Table 2-7 Status Icons (cont'd.)
Icon
Ethernet Dual Control Head
-
Description
Non Secured Call — Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available when the radio:
• Is in the Local Site Trunking Mode.
• Attempts to connect to a gateway.
Not Secured Call — Air Encryption Unavailable
Alternately blinking, indicates that Air Encryption is not available when the radio:
• Is in TMO Mode.
• Communicates through a gateway.
Not Secured Call — Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available in DMO Mode. The icon appears
after the PTT button is pressed.
Dual Control Head — Indicates that Dual Control Head feature is enabled, and both
control heads are connected to the transceiver.
Single Control Head — Indicates that Dual Control Head feature is enabled, but only one
control head is connected to the transceiver.
Link Error — Indicates that connection between the control head and the transceiver
has been lost, for example, due to an error.
Key Press Token — In Dual Control Head operation, blinking icon indicates that key press
token is reserved by one of the control heads.
CH1 — Indicates that particular activities/settings apply to Control Head 1. Control Head
1 is a control head connected to port 1 on the expansion head.
CH2 — Indicates that particular activities/settings apply to Control Head 2. Control Head
2 is a control head connected to port 2 on the expansion head.
Speaker 1 Off (Low Audio) — Indicates that audio will not sound through the speaker of
the Control Head 1.
Speaker 2 Off (Low Audio) — Indicates that audio will not sound through the speaker of
the Control Head 2.
Speakers Off (Low Audio) — Indicates that speakers of both control heads are off.
All Tones Off/Duplex and Simplex Ring Muted — Indicates that all alert tones are off,
or both simplex ring volume is set to 0 and duplex ring volume is set to 0. Applicable
to Control Head 1.
Simplex Ring Muted — Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0. Applicable to Control Head 1.
Duplex Ring Muted — Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0. Applicable to Control Head 1.
2.4 Status Icons
2-13