Motorola MTM800 FuG Feature User Manual page 27

Table 2-7 Status Icons (cont'd.)
Icon
Direct Mode Operation
General Icons
-
Description
Broadcast Call — Displayed when the radio is in the Broadcast Call.
Gateway Mode — Displayed when the radio is switched to work as a gateway in Gateway
Mode.
Scan — Indicates talkgroup scanning is activated in the radio.
Priority Scan — Indicates that priority scanning is activated in the radio.
Data Connected — Displayed when the Packet Data feature is activated and the external
device sets up data connection with the radio.
Data Transmit/Receive — Displayed when the Packet Data feature is activated and the
external device sets up data connection with the radio.
• No number — standby data session.
• Number 1, 2, 3, or 4 — indicates active data session with 25%, 50%, 75%, or
100% bandwidth.
Direct Mode Call – Displayed during a Direct Mode call; more bars indicate a stronger
signal.
Direct Mode — Displayed when the radio is in Direct Mode.
Repeater Mode — Displayed when the radio is switched to work as a repeater in Repeater
Mode.
DMO Gateway Communication Mode — Indicates that gateway is selected. The icon
has the following states:
• Solid — while the radio is synchronized with the gateway.
• Blinking — while the radio is not synchronized or during attachment.
• No icon — during a radio to radio and repeater call.
DMO Repeater Communication Mode — Displayed when the Repeater or GW + Rep
option in DMO Mode is selected. This icon has the following states:
• Solid — while the radio has detected the repeater (for example when the radio
receives a presence signal).
• Blinking — while the radio has not detected the repeater or during attachment.
• No icon — during a radio to radio and gateway call.
All Tones Off and Duplex and Simplex Ring Muted — Indicates that all alert tones are off
and both duplex an simplex ring volume is set to 0.
Simplex Ring Muted — Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0.
Duplex Ring Muted — Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0.
2.4 Status Icons
2-11