Broadcast Call; Ambience Listening (Al) Call; One-Touch Button Feature; Table 2-8 One-Touch Button Features - Motorola MTM800 FuG Feature User Manual

Hide thumbs Also See for MTM800 FuG:
Table of Contents

Advertisement

Available languages

Available languages

2.13 Broadcast Call

The Broadcast Group Call (also called Site Wide Call) is a high-priority group call from the console operator (or
dispatcher) to all users located at one or more sites. The radios are configured to monitor a Broadcast Call, but
you cannot talk back. The call can be received as a normal Broadcast Call or an Emergency Broadcast Call. The
Broadcast Call preempts an ongoing Group Call that has the same or lower call priority.

2.14 Ambience Listening (AL) Call

This feature allows a console operator (or dispatcher) to establish a special call with a specific radio. It enables
to listen to the conversations and background noises within the range of the radio microphone. The call is set up
without any indication to the affected radio, and any lower priority ongoing voice call or packet data transfer
may be preempted.
After accepting the call, the radio transmits in a simplex call without any action from or indication to the user.
The Ambience Listening Call automatically ends when you initiate any voice call, switch to Emergency or TXI
Mode, or send Emergency Alarm.

2.15 One-Touch Button Feature

To use One-Touch Button feature press and hold an assigned key to activate one of the following features:

Table 2-8 One-Touch Button Features

Feature
Backlight
TMO Talkgroup Scan
DMO / TMO Switch
Sending Status
Change Talkgroup
Hi/Low Audio
Sending User Defined Message
Transmit Inhibit (TXI)
Private Call
Phone Call
PABX Call
Screen Saver
Display Time
Covert Mode
Horn and Lights
Initiate Call-Out Fallback Alert
RUA / RUI
-
Description
Switches backlight settings.
Turns on/off the Talkgroup Scan feature in TMO Mode.
Switches between TMO and DMO Mode.
Sends a dedicated status message to a dedicated address.
Changes the talkgroup to the predefined by your service provider.
Activates high/low audio.
Sends a predefined/user defined template to a dedicated address.
Turns on/off TXI Mode.
Initiates a private call to a predefined entry in the contact list.
Initiates a phone call to a predefined entry in the contact list.
Initiates a PABX call to a predefined entry in the contact list.
Turns on/off the Screen Saver feature.
Shows time and date on a display.
Turns on/off the Covert Mode.
Turns on/off the Horn and Lights.
Sends Fallback Alert.
Logs you in/out.
2.13 Broadcast Call
2-19

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Mtm800 fug et

Table of Contents